Irema FFP2 NR filtering half mask, 25 pieces, head strap
Nur 0,20€/Stück!
€9.90*
Content:
25 Stück
(€0.40* / 1 Stück)
No longer available
Total:
*
Product number:
FFP2-NR
Packunit:
Box
Product information "Irema FFP2 NR filtering half mask, 25 pieces, head strap"
High quality FFP2 mask, ideal for protection against particles
FFP masks protect in 3 classes against aqueous and oily aerosols, smoke and fine dust at work. Their protective function is standardized throughout Europe according to EN 149. They are referred to as particle-carrying half masks or fine dust masks, and are subdivided into protection classes FFP1, FFP2 and FFP3. FFP masks are usually made entirely of non-woven fabric with rubber straps and a malleable nose clip to ensure an optimal fit. During the Corona pandemic, both the RKI and the German government recommend wearing respiratory protection with protection class FFP2 or higher. Only this provides reliable protection against viruses and corona. FFP masks without a valve also provide a high level of protection for the person in front of you.
FFP2 NR Filtering half mask without valve
- Latex-free elastic straps (loop behind the head)
- Made in EU (Ireland)
- Nosepiece
- Approved according to CE EN 149:2001 + A1:2009
- Filtering class: FFP 2 NR
- Packaging unit: 25 pieces in a box (individually packed)
How do I use an FFP mask correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Take the FFP mask folded flat out of the bag and pull it apart at the sides
- Place the mask over the nose/mouth area and attach the fixing straps to the back of the head or behind the ears, depending on the type
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, check that the FFP mask fits tightly
FFP masks protect in 3 classes against aqueous and oily aerosols, smoke and fine dust at work. Their protective function is standardized throughout Europe according to EN 149. They are referred to as particle-carrying half masks or fine dust masks, and are subdivided into protection classes FFP1, FFP2 and FFP3. FFP masks are usually made entirely of non-woven fabric with rubber straps and a malleable nose clip to ensure an optimal fit. During the Corona pandemic, both the RKI and the German government recommend wearing respiratory protection with protection class FFP2 or higher. Only this provides reliable protection against viruses and corona. FFP masks without a valve also provide a high level of protection for the person in front of you.
FFP2 NR Filtering half mask without valve
- Latex-free elastic straps (loop behind the head)
- Made in EU (Ireland)
- Nosepiece
- Approved according to CE EN 149:2001 + A1:2009
- Filtering class: FFP 2 NR
- Packaging unit: 25 pieces in a box (individually packed)
How do I use an FFP mask correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Take the FFP mask folded flat out of the bag and pull it apart at the sides
- Place the mask over the nose/mouth area and attach the fixing straps to the back of the head or behind the ears, depending on the type
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, check that the FFP mask fits tightly
Login
Documents
Colored surgical mask, 5 colors mix, colorful, green, blue, yellow, pink, orange, type IIR, 3-layer, latex-free, 50 pieces, disposable mask, medical mouth guard, MNS, mouth-nose protection, disposable mask, protective mask, Med-Comfort
Surgical mask with ear loops and nose clip, 3-ply, mix
Fleecemouthguard in 5 color mix
Our popular medical mouthguard with elastic bands convinces with its high-quality workmanship, high filter efficiency as well as the reliable liquid resistance. The ear loops allow a high wearing comfort and the integrated metal strap a good fit on the nose. The medical mouthguard in various colors not only stands out visually from the others in everyday life - medical practices, companies, hairdressers, nail salons and Co. resort to colored mouth-nose protection to complement the uniform company clothing.
- 3-ply, made of 100% glass fiber-free non-woven fabric
- With nose clip
- With elastic bands
- Latex-free
- Colors in the box: green, blue, yellow, pink, orange
- Packaging unit: 1 box of 50 pieces
Quality features
- Filter performance = 98%
- EN 14683 Type II R
- Class I medical device according to. Regulation (EU) 2017/745
How do I use a mouth-nose guard correctly?
- First wash your hands thoroughly so as not to contaminate the mask
- Place the mouthguard over the mouth and nose
- Fasten the mouthguard to the ears using the loops or tie it behind the head using the fixing straps
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, pull the mouthguard a little over the chin and check for correct position
Fleecemouthguard in 5 color mix
Our popular medical mouthguard with elastic bands convinces with its high-quality workmanship, high filter efficiency as well as the reliable liquid resistance. The ear loops allow a high wearing comfort and the integrated metal strap a good fit on the nose. The medical mouthguard in various colors not only stands out visually from the others in everyday life - medical practices, companies, hairdressers, nail salons and Co. resort to colored mouth-nose protection to complement the uniform company clothing.
- 3-ply, made of 100% glass fiber-free non-woven fabric
- With nose clip
- With elastic bands
- Latex-free
- Colors in the box: green, blue, yellow, pink, orange
- Packaging unit: 1 box of 50 pieces
Quality features
- Filter performance = 98%
- EN 14683 Type II R
- Class I medical device according to. Regulation (EU) 2017/745
How do I use a mouth-nose guard correctly?
- First wash your hands thoroughly so as not to contaminate the mask
- Place the mouthguard over the mouth and nose
- Fasten the mouthguard to the ears using the loops or tie it behind the head using the fixing straps
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, pull the mouthguard a little over the chin and check for correct position
Disposable gloves, latex gloves, black (black), powder-free, 100 pieces, size XS-XL, Style by Med-Comfort
Size:
M
The powder-free disposable latex glove is chlorinated on the inside and polymer-coated on the outside, reducing protein concentrations and making it more allergy-friendly than conventional disposable latex gloves. Our latex glove in elegant black provides an optimal grip and flexible wear thanks to its micro-roughened surface and ambidextrous fit, and is ideal as your personal protective equipment for use in the hairdressing industry as a dyeing glove, in tattoo, cosmetic and pedicure studios. Also in use in the food industry, the latex glove offers a high wearing comfort and ensures maximum safety in contact with all foodstuffs.
- Chlorinated on the inside, polymer coated on the outside, resulting in reduced protein concentrations that can cause allergic reactions
- Micro-rough and grippy
- Ambidextrous fit
- Powder-free
- Non-sterile
- Color: Black (Black)
- Available sizes: XS to XL
- Packaging unit: 1 box of 100 pieces
Quality features
- AQL 1.5
- EN 420
- EN 455
- EN 374
- Suitable for foodstuffs according to Regulation (EC) 1935/2004
- PPE category III according to. PPE Regulation (EU) 2016/425
- Medical device class I according to Regulation (EU) 2017/745
Advantages of latex gloves
Latex gloves are the classic in the category of disposable gloves. Latex gloves from Hautsache Protect are powder-free and comply with EU standard 455, so they are approved for medical use. Latex gloves are very tight-fitting and wear like a second skin, they are also very stretchy and tear-resistant. The latex rubber which is used for the production is a natural product and therefore, unlike the other disposable gloves, partially biodegradable. Latex gloves may only come into contact with fat-free food, but are then suitable in the food sector, medicine, tattoo studios or hair salons.
Latex glove, powder-free: buy latex disposable glove w, food grade latex glove
.- Chlorinated on the inside, polymer coated on the outside, resulting in reduced protein concentrations that can cause allergic reactions
- Micro-rough and grippy
- Ambidextrous fit
- Powder-free
- Non-sterile
- Color: Black (Black)
- Available sizes: XS to XL
- Packaging unit: 1 box of 100 pieces
Quality features
- AQL 1.5
- EN 420
- EN 455
- EN 374
- Suitable for foodstuffs according to Regulation (EC) 1935/2004
- PPE category III according to. PPE Regulation (EU) 2016/425
- Medical device class I according to Regulation (EU) 2017/745
Advantages of latex gloves
Latex gloves are the classic in the category of disposable gloves. Latex gloves from Hautsache Protect are powder-free and comply with EU standard 455, so they are approved for medical use. Latex gloves are very tight-fitting and wear like a second skin, they are also very stretchy and tear-resistant. The latex rubber which is used for the production is a natural product and therefore, unlike the other disposable gloves, partially biodegradable. Latex gloves may only come into contact with fat-free food, but are then suitable in the food sector, medicine, tattoo studios or hair salons.
Tip
Colored surgical mask, black, black, type IIR, 4-ply, latex-free, 50 pieces, disposable mask, medical mouth guard, MNS, mouth-nose protection, disposable mask, protective mask, Med-Comfort
Surgical mask with ear loops and nose clip, 4-ply, black
Our popular medical mouthguard with elastic straps impresses with its high-quality workmanship, high filter efficiency and reliable fluid resistance. The ear loops allow for a high wearing comfort and the integrated metal strap for a good fit on the nose. The medical mouthguard in various colors not only stands out visually from the others in everyday life - medical practices, companies, hairdressers, nail studios and Co. resort to colored mouth-nose protection to complement the uniform company clothing.
- 4-ply, made of 100% glass fiber-free non-woven fabric
- With nose clip
- With elastic bands
- Latex-free
- Color: Black
- Packaging unit: 1 box of 50 pieces
Quality features
- Filtering performance = 98%
- EN 14683 Type II R
- Class I medical device according to Regulation (EU) 2017/745
How do I use a mouth-nose guard correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Place the mouthguard over the mouth and nose
- Fasten the mouthguard to the ears using the loops or tie it behind the head using the fixing straps
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, pull the mouthguard a little over the chin and check for correct position
Our popular medical mouthguard with elastic straps impresses with its high-quality workmanship, high filter efficiency and reliable fluid resistance. The ear loops allow for a high wearing comfort and the integrated metal strap for a good fit on the nose. The medical mouthguard in various colors not only stands out visually from the others in everyday life - medical practices, companies, hairdressers, nail studios and Co. resort to colored mouth-nose protection to complement the uniform company clothing.
- 4-ply, made of 100% glass fiber-free non-woven fabric
- With nose clip
- With elastic bands
- Latex-free
- Color: Black
- Packaging unit: 1 box of 50 pieces
Quality features
- Filtering performance = 98%
- EN 14683 Type II R
- Class I medical device according to Regulation (EU) 2017/745
How do I use a mouth-nose guard correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Place the mouthguard over the mouth and nose
- Fasten the mouthguard to the ears using the loops or tie it behind the head using the fixing straps
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, pull the mouthguard a little over the chin and check for correct position
Disposable gloves, nitrile gloves, blue, powder-free, 100 pieces, size XS-XL, Pura Comfort
Size:
M
Our puracomfort nitrile glove, a true all-rounder among disposable gloves, is particularly thin, thus ensuring excellent tactile sensitivity. With its micro-rough surface and excellent ambidextrous fit, the nitrile glove ensures optimum grip and flexible wear. Compared to a latex glove, the nitrile glove is also free of allergy-causing latex proteins and is thus considered an alternative for your ideal work protection. Nitrile disposable gloves are resistant to chemicals and are particularly stretchy and tear-resistant in use. Due to their resistance to oils and fats, disposable nitrile gloves are also suitable for use in the food industry. The good protective properties of nitrile against bacteria and viruses also allow its use in medicine or laboratories.
Nitrile glove
- Chemical protective glove
- Finger textured for a good grip
- Very suitable for the food industry
- Very good tactile sensitivity
- Lightweight design - Thin film nitrile glove
- Excellent ambidextrous fit
- Good stretch
- Powder free
- Non sterile
- Color: Blue
- Packaging unit: 1 box of 100 pieces
Quality features
- AQL 1.5
- EN 420
- EN 455
- EN 374
- Suitable for food according to. Regulation (EC) 1935/2004
- PPE category III acc. to PPE Regulation (EU) 2016/425
- Medical device class I acc. to Regulation (EU) 2017/745
- Length: =240 mm
Advantages of nitrile gloves
Gloves made of nitrile are not only convincing due to their high wearing comfort. Compared to latex gloves, they are also free of allergy-causing latex proteins and are thus considered an alternative. Nitrile gloves are resistant to chemicals and are particularly elastic and tear-resistant in use. Due to their resistance to oils and greases, nitrile gloves are also suitable for use in the food industry. The good protective properties against bacteria and viruses also allow the use in medicine or laboratories.
Nitrile glove
: buy disposable nitrile glove, chemical resistant and food grade nitrile
.- Chemical protective glove
- Finger textured for a good grip
- Very suitable for the food industry
- Very good tactile sensitivity
- Lightweight design - Thin film nitrile glove
- Excellent ambidextrous fit
- Good stretch
- Powder free
- Non sterile
- Color: Blue
- Packaging unit: 1 box of 100 pieces
Quality features
- AQL 1.5
- EN 420
- EN 455
- EN 374
- Suitable for food according to. Regulation (EC) 1935/2004
- PPE category III acc. to PPE Regulation (EU) 2016/425
- Medical device class I acc. to Regulation (EU) 2017/745
- Length: =240 mm
Advantages of nitrile gloves
Gloves made of nitrile are not only convincing due to their high wearing comfort. Compared to latex gloves, they are also free of allergy-causing latex proteins and are thus considered an alternative. Nitrile gloves are resistant to chemicals and are particularly elastic and tear-resistant in use. Due to their resistance to oils and greases, nitrile gloves are also suitable for use in the food industry. The good protective properties against bacteria and viruses also allow the use in medicine or laboratories.
Content: 100 Stück (€0.04* / 1 Stück)
€3.90*
From €3.63* / 100 Box
Descolind Expert skin protection cream fragrance free, 100ml
DESCOLIND EXPERT Fragrance-free water-in-oil skin protection and care cream
This skin protection cream was specially developed for the protective use of stressed skin. As a water-in-oil emulsion, DESCOLIND EXPERT is easy to spread and is quickly absorbed into the skin, leaving behind a smooth, non-greasy protective film.
DESCOLIND EXPERT is ideal for daily use before skin-stressing activities to protect the skin of the hands during wet work and also when wearing gloves.
In addition to its protective function, DESCOLIND EXPERT cares for the skin with refatting and moisturizing ingredients as well as vitamin E. With a pleasant smell of beeswax. The cream contains a lipid content of 15 %.
DESCOLIND EXPERT skin and protective cream is suitable for use with high-quality protective gloves made of nitrile and latex.
- Skin caring with vitamin E, glycerin and beeswax
- Formulation dermatologically tested
- Protective effect confirmed according to the latest test methods (in accordance with TRGS 401/ABD)
- Protects the skin from water-soluble substances
This skin protection cream was specially developed for the protective use of stressed skin. As a water-in-oil emulsion, DESCOLIND EXPERT is easy to spread and is quickly absorbed into the skin, leaving behind a smooth, non-greasy protective film.
DESCOLIND EXPERT is ideal for daily use before skin-stressing activities to protect the skin of the hands during wet work and also when wearing gloves.
In addition to its protective function, DESCOLIND EXPERT cares for the skin with refatting and moisturizing ingredients as well as vitamin E. With a pleasant smell of beeswax. The cream contains a lipid content of 15 %.
DESCOLIND EXPERT skin and protective cream is suitable for use with high-quality protective gloves made of nitrile and latex.
- Skin caring with vitamin E, glycerin and beeswax
- Formulation dermatologically tested
- Protective effect confirmed according to the latest test methods (in accordance with TRGS 401/ABD)
- Protects the skin from water-soluble substances
€3.90*
SolidSafety Tough Fine Touch Protective Glove
Size:
M
SolidSafety Tough Fine Touch ultralight assembly glove
The ultralight SolidSafety Tough Fine Touch protective glove feels like a second skin. The very lightweight polyurethane coating is stain resistant and provides excellent grip when handling wet and oily items or in such work environments. This protective glove is approx. 30% lighter than comparable nylon-PU gloves and also has an exceptionally good tactile sensitivity.
- Ultra-light assembly glove with "second skin feeling", which is created by the very fine in 18 gg knitted base material
- Coated with a very light, dirt-repellent soft polyurethane coating
which provides an excellent grip. The coating is approx. 30 % lighter than comparable nylon-PU gloves
- Very good tactile sensitivity, perfectly suited for secure gripping of the smallest components/small parts
- Touch screen compatible
- Knitted cuff with colored piping for size differentiation
- The ergonomic fit allows fatigue-free work with good breathability
- All-rounder for a wide range of mechanical applications, where a particularly high sensitivity is required
- Sizes 6-11 / XS-XXL
Quality features
- EN 420
- EN 388 (Level 3121X)
- Sanitized equipment - antimicrobial treated
- PPE category II acc. to PPE Regulation (EU) 2016/425
*) Produced without silicones.
The ultralight SolidSafety Tough Fine Touch protective glove feels like a second skin. The very lightweight polyurethane coating is stain resistant and provides excellent grip when handling wet and oily items or in such work environments. This protective glove is approx. 30% lighter than comparable nylon-PU gloves and also has an exceptionally good tactile sensitivity.
- Ultra-light assembly glove with "second skin feeling", which is created by the very fine in 18 gg knitted base material
- Coated with a very light, dirt-repellent soft polyurethane coating
which provides an excellent grip. The coating is approx. 30 % lighter than comparable nylon-PU gloves
- Very good tactile sensitivity, perfectly suited for secure gripping of the smallest components/small parts
- Touch screen compatible
- Knitted cuff with colored piping for size differentiation
- The ergonomic fit allows fatigue-free work with good breathability
- All-rounder for a wide range of mechanical applications, where a particularly high sensitivity is required
- Sizes 6-11 / XS-XXL
Quality features
- EN 420
- EN 388 (Level 3121X)
- Sanitized equipment - antimicrobial treated
- PPE category II acc. to PPE Regulation (EU) 2016/425
*) Produced without silicones.
€3.90*
From €3.63* / 100 Paar
Suggested products
Nur 0,28€/Stück!
Irema FFP3 NR filtering half mask, 25 pieces, head strap
High-quality protective mask, ideal for protection against particles
FFP masks protect in 3 classes against aqueous and oily aerosols, smoke and fine dust at work. Their protective function is standardized throughout Europe according to EN 149. They are referred to as particle filtering half masks or fine dust masks, and are subdivided into protection classes FFP1, FFP2 and FFP3. FFP masks are mostly made entirely of non-woven fabric with rubber straps and a moldable nose clip to ensure an optimal fit. During the Corona pandemic, both the RKI and the German government recommend wearing respiratory protection with protection class FFP2 or higher. Only this provides reliable protection against viruses and corona. FFP masks without a valve also offer a high level of protection to the person in front of you.
FFP3 NR Filtering Half Mask without Valve
- Latex-free elastic straps (loop behind the head)
- Made in EU (Ireland)
- Nosepiece
- Approved according to CE EN 149:2001 + A1:2009
- Filtering class: FFP 3 NR
- Packaging unit: 25 pieces in a box (individually packed)
How do I use an FFP mask correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Take the FFP mask folded flat out of the bag and pull it apart at the sides
- Place the mask over the nose/mouth area and attach the fixing straps to the back of the head or behind the ears, depending on the type
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, check that the FFP mask fits tightly
FFP masks protect in 3 classes against aqueous and oily aerosols, smoke and fine dust at work. Their protective function is standardized throughout Europe according to EN 149. They are referred to as particle filtering half masks or fine dust masks, and are subdivided into protection classes FFP1, FFP2 and FFP3. FFP masks are mostly made entirely of non-woven fabric with rubber straps and a moldable nose clip to ensure an optimal fit. During the Corona pandemic, both the RKI and the German government recommend wearing respiratory protection with protection class FFP2 or higher. Only this provides reliable protection against viruses and corona. FFP masks without a valve also offer a high level of protection to the person in front of you.
FFP3 NR Filtering Half Mask without Valve
- Latex-free elastic straps (loop behind the head)
- Made in EU (Ireland)
- Nosepiece
- Approved according to CE EN 149:2001 + A1:2009
- Filtering class: FFP 3 NR
- Packaging unit: 25 pieces in a box (individually packed)
How do I use an FFP mask correctly?
- First, wash your hands thoroughly to avoid contaminating the mask
- Take the FFP mask folded flat out of the bag and pull it apart at the sides
- Place the mask over the nose/mouth area and attach the fixing straps to the back of the head or behind the ears, depending on the type
- Slightly compress the nose clip over the bridge of the nose and adjust it to the shape of the face
- Finally, check that the FFP mask fits tightly
SolidSafety FFP2-Maske, Filtrierende Halbmaske (FFP2 NR D) in verschiedenen Farben, 5 Stück
Colour:
weiß
SolidSafety Filtrierende Halbmaske FFP2 NR
Artikelnummer: 2600
Produkt: FFP2-Masken
Hersteller: AMPri
Marke: SolidSafety
Einwegprodukt
Farbe: weiß, pink & schwarz
Form: konisch
Besonderheit: Ohne Ventil, mit Ohrschlaufen
Material: Polypropylen-Vlies
Norm: EN149
Maskenklassifikation: FFP2
Eignung: Körpernahe Dienstleistung, Lebensmittelindustrie, Bildung, Behörde, sonstige Medizin und Krankenhaus
2600 FFP2-Maske, Filtrierende Halbmaske (FFP2 NR D), von SolidSafety
Wie verwende ich eine FFP Maske korrekt?
• Zunächst gründlich die Hände waschen, um die Maske nicht zu kontaminieren
• Nehmen Sie die flach gefaltete FFP Maske aus dem Beutel und ziehen Sie diese an den Seiten auseinander
• Legen Sie die Maske über die Nasen-/Mundpartie und bringen die Fixierbänder je nach Typ am Hinterkopf beziehungsweise hinter den Ohren an
• Den Nasenbügel über den Nasenrücken leicht zusammendrücken und ihn der Gesichtsform anzupassen
• Prüfen Sie abschließend noch den festen Sitz der FFP Maske
Der Atemschutz in Schwarz, Weiß oder Pink macht es Krankheitserregern schwer! Bei korrekter Anwendung kann die Übertragung von Krankheitserregern wesentlich erschwert oder sogar verhindert werden. Damit trägt das Einwegprodukt zur Sicherung von Hygienestandards bei und ist aus dem medizinischen Bereich sowie der Gastronomie oder den Dienstleistungen des körpernahen Bereichs nicht mehr wegzudenken. Die Maskenklassifikation ist FFP2. Durch diese Klassifizierung wird ausgesagt, dass die Maske Schutz vor giftigen Stäuben, Rauch und Aerosolen bietet. Auch Krankheitserreger wie Viren, Bakterien und Pilzsporen werden gefiltert. Entscheidend ist, darauf zu achten, dass die Maske gut schließt. Vor allem Bart und Haarwuchs können den dichten Sitz der FFP-Masken beeinträchtigen. Das Produkt ist außerdem dazu geeignet, Risiken, die zu sehr schwer wiegenden Folgen wie dem Tod oder irreversiblen Gesundheitsschäden führen können, abzuhalten. Entsprechend sind sie gemäß PSA-Verordnung in der Kategorie III eingeordnet. Insgesamt erfüllt das Produkt hiermit die europäische Norm EN 149. Durch seine Produkteigenschaften ist das Utensil damit für folgende Branchen bestimmt: In der körpernahen Dienstleistung, der Lebensmittelindustrie, der Bildung, der Behörde, der sonstigen Medizin und dem Krankenhaus. Weitere Eigenschaften der FFP2-MaskeZusätzlich zeichnen dieses Produkt noch weitere, vorteilhafte Eigenschaften aus. Verwendet wurde Polypropylen als Material. Damit wird der Schutz zu einem sehr guten Allrounder, der durch eine hohe Widerstandskraft bei gleichzeitig sehr geringem Gewicht überzeugt. Auf diese Weise wird der Tragekomfort auch in stressigen oder extremen Situationen sichergestellt. Mit einer Größe von 105 mm Länge und 155 mm Breite ist dieser Körperschutz für die meisten Menschen gut passend. Die besonders weichen, dehnbaren und optimal in der Länge gewählten Ohrschlaufen der FFP2 Maske sorgen für einen angenehmen Tragekomfort. Bei einem durchschnittlichen Kopf werden die Ohrschlaufen nicht stark überdehnt, sodass es zu keiner übermäßigen Anspannung im Ohrbereich kommt. Trotzdem liegt die FFP2 Maske eng an und sorgt damit für optimalen Schutz. Die FFP2 Maske kommt ohne Ventil daher. Alles in allem handelt es sich bei diesem Produkt also um einen wertvollen Bestandteil für eine gute Arbeitsschutzausrüstung.
Artikelnummer: 2600
Produkt: FFP2-Masken
Hersteller: AMPri
Marke: SolidSafety
Einwegprodukt
Farbe: weiß, pink & schwarz
Form: konisch
Besonderheit: Ohne Ventil, mit Ohrschlaufen
Material: Polypropylen-Vlies
Norm: EN149
Maskenklassifikation: FFP2
Eignung: Körpernahe Dienstleistung, Lebensmittelindustrie, Bildung, Behörde, sonstige Medizin und Krankenhaus
2600 FFP2-Maske, Filtrierende Halbmaske (FFP2 NR D), von SolidSafety
Wie verwende ich eine FFP Maske korrekt?
• Zunächst gründlich die Hände waschen, um die Maske nicht zu kontaminieren
• Nehmen Sie die flach gefaltete FFP Maske aus dem Beutel und ziehen Sie diese an den Seiten auseinander
• Legen Sie die Maske über die Nasen-/Mundpartie und bringen die Fixierbänder je nach Typ am Hinterkopf beziehungsweise hinter den Ohren an
• Den Nasenbügel über den Nasenrücken leicht zusammendrücken und ihn der Gesichtsform anzupassen
• Prüfen Sie abschließend noch den festen Sitz der FFP Maske
Der Atemschutz in Schwarz, Weiß oder Pink macht es Krankheitserregern schwer! Bei korrekter Anwendung kann die Übertragung von Krankheitserregern wesentlich erschwert oder sogar verhindert werden. Damit trägt das Einwegprodukt zur Sicherung von Hygienestandards bei und ist aus dem medizinischen Bereich sowie der Gastronomie oder den Dienstleistungen des körpernahen Bereichs nicht mehr wegzudenken. Die Maskenklassifikation ist FFP2. Durch diese Klassifizierung wird ausgesagt, dass die Maske Schutz vor giftigen Stäuben, Rauch und Aerosolen bietet. Auch Krankheitserreger wie Viren, Bakterien und Pilzsporen werden gefiltert. Entscheidend ist, darauf zu achten, dass die Maske gut schließt. Vor allem Bart und Haarwuchs können den dichten Sitz der FFP-Masken beeinträchtigen. Das Produkt ist außerdem dazu geeignet, Risiken, die zu sehr schwer wiegenden Folgen wie dem Tod oder irreversiblen Gesundheitsschäden führen können, abzuhalten. Entsprechend sind sie gemäß PSA-Verordnung in der Kategorie III eingeordnet. Insgesamt erfüllt das Produkt hiermit die europäische Norm EN 149. Durch seine Produkteigenschaften ist das Utensil damit für folgende Branchen bestimmt: In der körpernahen Dienstleistung, der Lebensmittelindustrie, der Bildung, der Behörde, der sonstigen Medizin und dem Krankenhaus. Weitere Eigenschaften der FFP2-MaskeZusätzlich zeichnen dieses Produkt noch weitere, vorteilhafte Eigenschaften aus. Verwendet wurde Polypropylen als Material. Damit wird der Schutz zu einem sehr guten Allrounder, der durch eine hohe Widerstandskraft bei gleichzeitig sehr geringem Gewicht überzeugt. Auf diese Weise wird der Tragekomfort auch in stressigen oder extremen Situationen sichergestellt. Mit einer Größe von 105 mm Länge und 155 mm Breite ist dieser Körperschutz für die meisten Menschen gut passend. Die besonders weichen, dehnbaren und optimal in der Länge gewählten Ohrschlaufen der FFP2 Maske sorgen für einen angenehmen Tragekomfort. Bei einem durchschnittlichen Kopf werden die Ohrschlaufen nicht stark überdehnt, sodass es zu keiner übermäßigen Anspannung im Ohrbereich kommt. Trotzdem liegt die FFP2 Maske eng an und sorgt damit für optimalen Schutz. Die FFP2 Maske kommt ohne Ventil daher. Alles in allem handelt es sich bei diesem Produkt also um einen wertvollen Bestandteil für eine gute Arbeitsschutzausrüstung.
